| |
 |
Major
Features
- Connect up to 5 Fibre Channel arbitrated
loop (FC-AL) users
- Cascade to support up to 126 active FC-AL
devices
- Full speed, full-duplex Fibre Channel 1.0625
Gb/s transfers
- Supports all Fibre Channel classes of
service
(1,2, 3 and intermixed) and all Fibre Channel
protocol layers
- Maintains loop integrity by providing
automatic
bypass of unused and/or non-powered ports
- Supports five loop connections on copper
cables
up to 30 meters (98')
|
|
Description
Fibre Channel Arbitrated Loop (FC-AL) provides
for high performance storage and networking
applications. With simpler cabling, longer
distances, and the ability to support larger
numbers of devices than parallel SCSI, FC-AL
technology is expanding rapidly.
The LightPulse™ LH1005 hub is the ideal
solution for small Fibre Channel arbitrated loop
FC-AL configurations. The LH1005 enables a
centrally managed physical star topology while
maintaining the logical loop requirements of
FC-AL. The LH1005 supports automatic bypassing of
unused and/or unpowered ports, allowing system
administrators to add and/or remove users without
affecting the network.
Each LH1005 repeats and refreshes the data
signal, extending user distances while maintaining
signal quality. The LH1005 can be cascaded to
support larger loop configurations up to the FC-AL
limit of 126 active loop participants.
|
|
|
Standards
ANSI
Fibre Channel FC-0 and FC-1 compliant
Architecture
Fibre
channel arbitrated loop
Copper
| Ports |
5 |
| Cable
Type |
Dual
twinax or quad axial |
| Connector
Type: |
DB9 |
| Data
Rate |
1.0625
Gb/s |
| Distance |
98'
(30 Meters) |
Physical Dimensions
213mm
x 45mm x 140mm (8.40" x 1.75" x
5.50")
Power Requirements
| Volts: |
90-264
VAC |
| Power |
30
watts typical |
| Hz |
50/60 |
|
Environmental Conditions
| Operating
Temperature: |
0°
to 45° C (32° to 113° F) |
| Storage
Temperature: |
-10°
to 55° C (14° to 131° F) |
| Relative
Humidity: |
5%
to 95% non-condensing |
Agency Approvals
| UL
Listed to UL 1950 |
| CUR
Listed to CSA22.2, No. 950 |
| TUV
Certified to EN60950 |
| FCC
Rules, Part 15, Class A |
| ICES-003,
Class A |
| EMC
Directive 89/336/EEC (CE Mark) |
| -
EN55022, Class A |
| -
EN50082-1 |
| Australian
EMC Framework (C-Tick Mark) |
| -
AS/NZS 3548, Class A |
| VCCI,
Class A |
Ordering Information
| LH1005 |
5-port
work group fibre hub, copper DB9
interface |
|
|
|
|
|
|